SELLERSRODSHOP
Well-Known Member
just a heads up that cj's has the repop pop open gas cap kits on closeout. complete kit minus the emblem for $27 w/ free shipping. got mine in today & it looks good.
-
Hello there guest and Welcome to The #1 Classic Mustang forum!
To gain full access you must Register. Registration is free and it takes only a few moments to complete.
Already a member? Login here then!
pop open gas cap
- Thread starter SELLERSRODSHOP
- Start date
Shows that they are $80 unless I'm missing something http://www.cjponyparts.com/fuel-cap-pop-open-1970/p/GC70P/ http://www.cjponyparts.com/fuel-cap-flip-down-type-1969/p/GC69P/
68stang289
Member
You picked up the one with the emblem already on it.
67-68 - http://www.cjponyparts.com/product.asp?pn=2154885
69 - http://www.cjponyparts.com/product.asp?pn=2154886
70 - http://www.cjponyparts.com/product.asp?pn=2154887
Great deal and good find!
67-68 - http://www.cjponyparts.com/product.asp?pn=2154885
69 - http://www.cjponyparts.com/product.asp?pn=2154886
70 - http://www.cjponyparts.com/product.asp?pn=2154887
Great deal and good find!
Go to the clearance page: http://www.cjponyparts.com/category.asp?c=50220333
Any 65/66 guys wanting an upgrade? Snag the 70 cap - it fits...
Any 65/66 guys wanting an upgrade? Snag the 70 cap - it fits...
Havok1
Member
:hijacked
Anyone had any experience with these window trims? The price cut makes them tempting.
http://www.cjponyparts.com/window-molding-rear-lower-driver-side-ford-fastback-1965-1966/p/RWM25/
Anyone had any experience with these window trims? The price cut makes them tempting.
http://www.cjponyparts.com/window-molding-rear-lower-driver-side-ford-fastback-1965-1966/p/RWM25/
34isgreat
Member
Just ordered one! Great buy! Thanks for the heads up.
34isgreat
Member
Cj does not have the emblem, ordered one from Mustangs Unlimited.
Badass70
Member
wow great deal i spent the 80$ :beat
"34isgreat" said:
+1.
janschutz
Corn Hauler
Order 2 and picked up the emblems at Dallas Mustang this last weekend. DM was having their open house so I go 10% off the emblems.
34isgreat
Member
Just got mine in the mail! Dude I am loving this, it looks so cool!
janschutz
Corn Hauler
did anyone find the emblems? Dallas Mustang did not have any last weekend o
o
I bought mine at a local shop:
American Mustang Parts
11315 Folsom Blvd
Rancho Cordova, CA 95742 (suburb of Sacramento)
916-635-7271
cost for the embelm was $14.30 + tax
American Mustang Parts
11315 Folsom Blvd
Rancho Cordova, CA 95742 (suburb of Sacramento)
916-635-7271
cost for the embelm was $14.30 + tax
mustangstofear
Active Member
If it is Ford it will fit fine, buy it. Rich.
buckeyedemon
Member
are they they discounted because they are scratched and dented?
blu67
Well-Known Member
Got mine this afternoon. Beautiful. I'm a far cry away from putting it on but it was too good a deal to pass up.
BTW, no, they are not damaged thus the sale. It was new, chrome awesome and well packed. Many times the vendor will pack the chrome with the screws for whatever part it is. It pisses me off. Screws scratch dumbass. This pop-open cap was wrapped in a soft material and the screws and other items were bagged.
Now, how does it all go together? There were no instructions! :rp
BTW, no, they are not damaged thus the sale. It was new, chrome awesome and well packed. Many times the vendor will pack the chrome with the screws for whatever part it is. It pisses me off. Screws scratch dumbass. This pop-open cap was wrapped in a soft material and the screws and other items were bagged.
Now, how does it all go together? There were no instructions! :rp
"blu67" said:
I rec'd mine yesterday and it was fine.
I put it together today and would not have figured it out except I had another complete gas cap assy to use as a model. I'll post instructions tomorrow(if I can remember), too busy at work now but off the bat, my 4 screws were to large of a diameter (size #5?), you need size #4, quantity 4.
Here are some quick instructions:
1. install the emblem on the flip-door. In my emblem kit, the supplied retainers were one size too big, I needed 3/16 (?) but Lowe's was out of those and I bought 5/32" e-clips instead.
2. turn the flip door upside down, resting the emblem against a towel (FYI, I did not take the flip door off the base)
3. place the spring against the back of the door
4. get the "cup" that has the gasket on it, place it on top of the spring with the gasket facing up
5. get the longer of the machine screws and the one washer, place the washer into the recessed hole of the cup and use the screw to attach the cup/screw assy to center hole in the back of the door
6. place the small rubber/black gasket in the recessed area of the gasket cup
7. lay the small "cap" over the black gasket, pointed end up, and use the 4 screws (in my case #4 machine 1/2" long) to attach the small cap to the gasket cup.
1. install the emblem on the flip-door. In my emblem kit, the supplied retainers were one size too big, I needed 3/16 (?) but Lowe's was out of those and I bought 5/32" e-clips instead.
2. turn the flip door upside down, resting the emblem against a towel (FYI, I did not take the flip door off the base)
3. place the spring against the back of the door
4. get the "cup" that has the gasket on it, place it on top of the spring with the gasket facing up
5. get the longer of the machine screws and the one washer, place the washer into the recessed hole of the cup and use the screw to attach the cup/screw assy to center hole in the back of the door
6. place the small rubber/black gasket in the recessed area of the gasket cup
7. lay the small "cap" over the black gasket, pointed end up, and use the 4 screws (in my case #4 machine 1/2" long) to attach the small cap to the gasket cup.