Need an alternator bearing

[janschutz]

I have an original 68 alternator that still charges great but the front bearing sequels. I Need an alternator bearing, does anyone know where to get one?

 

[d_ford]

Have you looked around for a local auto/electric repair shop? We have several in our area, you can take your original alternator, starter, etc to them and have them rebuilt.

 

[stangg]

Rock Auto carries them. You can most likely get one at NAPA too.
https://www.rockauto.com/catalog/x,carcode,1132333,pgname,Electrical

 

[B67FSTB]

I have an original 68 alternator that still charges great but the front bearing sequels. I Need an alternator bearing, does anyone know where to get one?

Dissamble the alternator and onto the bearing you should read its number.
It should be a commom bearing. (inner dia / outer dia / width)

Did you ever dissamble a alternator ? When not , you should pay attention that the coil and diode plate stays together during dissambling.
The coil is soldered to the diode plate.
Do you have access to a disk puller?

Sorry for the bad technical term but I hope you understand what I mean.

 

[janschutz]

Dissamble the alternator and onto the bearing you should read its number.
It should be a commom bearing. (inner dia / outer dia / width)

Did you ever dissamble a alternator ? When not , you should pay attention that the coil and diode plate stays together during dissambling.
The coil is soldered to the diode plate.
Do you have access to a disk puller?

Sorry for the bad technical term but I hope you understand what I mean.

Already have it apart. Took the front cover off and left the back side where the wires and diodes are.

 

[B67FSTB]

:thu :thu :thu

every store that has stuff for the industry, have those bearings.

 

[66HertzClone]

When I worked in the parts store, we had these on the shelf, 99503 was the part number.

 

[cmayna]

Right next to the muffler bearings.

 

[dm289]

While apart, solder on some new brushes and you have a rebuilt alternator... also make sure the plastic piece that holds the brushes isn't cracked...

 

[KTJMcG]

Muffler bearings?

 

[janschutz]

I found some of those in the driveway once, I wonder where they came from. :shrug

 

[Midlife]

I found some of those in the driveway once, I wonder where they came from. :shrug

Chevys.