-
Hello there guest and Welcome to The #1 Classic Mustang forum!
To gain full access you must Register. Registration is free and it takes only a few moments to complete.
Already a member? Login here then!
My 67 fastback build
- Thread starter Fst Blk
- Start date
Fst Blk
Well-Known Member
Got the trunk floor/drop off burnt in, along with the inner wheel well. Welded the inner structure back to the inner.
Floor area burnt in along with patching the metal that inner wheel well flanges to.
Rehung the shackles with the rear end and let her back down to check everything.
Gonna try to start cutting spot welds on the quarter this week and get the rest of it off. Hoping to be burning in the new quarter next Saturday.
Bill
Floor area burnt in along with patching the metal that inner wheel well flanges to.
Rehung the shackles with the rear end and let her back down to check everything.
Gonna try to start cutting spot welds on the quarter this week and get the rest of it off. Hoping to be burning in the new quarter next Saturday.
Bill
Fst Blk
Well-Known Member
You are kicking some butt, Bill. Real progress in short order. Well done.
At long last, mine will be sitting on it's own rubber before I go to bed tomorrow night if all stays on schedule. Just in time for a mystery guest's visit.
Thanks Terry. I hope you stay on track.
Bill
Grabber70Mach
Well-Known Member
Looking good, someday I'll have progress to show on mine.
From infinity and beyond
From infinity and beyond
Fst Blk
Well-Known Member
Getting closer. Got all the old quarter out.
Sprayed the inner structure with rust converter.
Dry fits of the new.
Still got this rust to deal with before I can get the quarter burnt in.
Working on the rear of the rocker area. I bought a passenger side and only needed the rear portion, so I had tons of rocker to work with. Worked it into shape. Needs a little bit more tweaking and shaping, but getting close.
Bill
Sprayed the inner structure with rust converter.
Dry fits of the new.
Still got this rust to deal with before I can get the quarter burnt in.
Working on the rear of the rocker area. I bought a passenger side and only needed the rear portion, so I had tons of rocker to work with. Worked it into shape. Needs a little bit more tweaking and shaping, but getting close.
Bill
Fst Blk
Well-Known Member
Yeah, it truly has been a rust bucket. If the car had never been touched and I had a chance to see all the rust in it, I probably never would have bought it... wait, I probably would have ;}
It's getting there. A couple more solid Saturdays and it should be rust free.
Bill
It's getting there. A couple more solid Saturdays and it should be rust free.
Bill
tarafied1
Well-Known Member
well it looks so much better, that will help keep you motivated