idler arm bolt and tie rods nut size

[Fst Blk]

Need to mock up my steering and need the bolt size that holds the ilder arm to the frame rail. Also, need the tie rod nut size. I know they are castle nuts, just needing what size. Trying to verify fitment of everything and these will solidify all my connections.

Bill

 

[Fst Blk]

:dun

Bill

 

[Midlife]

For a 1966, the bolt is 378405, and the nut is 34445. Those cross to 3/8-24x3.5", thread length of 2 5/32" for the bolt and a cone lock grade 5 3/8-24 nut using 9/16" wrench.

 

[Fst Blk]

For a 1966, the bolt is 378405, and the nut is 34445. Those cross to 3/8-24x3.5", thread length of 2 5/32" for the bolt and a cone lock grade 5 3/8-24 nut using 9/16" wrench.

Thank you sir.

Bill