• Hello there guest and Welcome to The #1 Classic Mustang forum!
    To gain full access you must Register. Registration is free and it takes only a few moments to complete.
    Already a member? Login here then!

Cool New Tool Thread

They DID fit. I had to pry some of the magnetic rails over a bit with an actual prybar and disheveled the drawer a bit but they are in. And a lot shinier than everything else in there.
sockets2.jpg
 
GypsyR said:
They DID fit. I had to pry some of the magnetic rails over a bit with an actual prybar and disheveled the drawer a bit but they are in. And a lot shinier than everything else in there.
sockets2.jpg
Click to expand...
looks like it is time for a bigger tool box! my socket drawers are so full but I keep adding more.
 
Local auction will be the death of me. Scored this baller bearing puller for two bucks. I suspect because it was unlabeled and nobody else bothered to Google what it was. Kind of an esoteric tool but handing for pulling the stuck input shaft bearings out of stuff liek Road Ranger transmissions and things. The puller pieces have little barbed ends that fit in between the races of a roller bearing and then are twisted 90 degrees to lock in. Retails for like $40 so not a huge score but anyway.
IMG_20260402_220743043_HDR.jpg


Also scored a $140 pin gauge set for $8. Like the definition of a tool I'll almost never use but sweet to have. Forgot to take a picture but it looks like this one on eBay. https://www.ebay.com/itm/2727262240...EXwf_kilR1Q9Jew2S74ANKHhRCX06bM0CNoBFsZu0jlhg
 
Both great finds. You'd be surprised how often that pin set might come in handy. You can never have too many puller set-ups. One might be designed for one purpose but you'll find others for it as well, as I'm sure you know.
 
You must log in or register to reply here.
Back
Top