Carb setup info

[B67FSTB]

So , I had bought a 351W engine in the past and meanwhile I made a teststand to runtest the engine.

The engine has a ACCELL distributor and the cap sits high so I have to rise the carb with a 1/2 spacer. So far so good.

What do I have : edelbrock 2181 intake which is a 4-bbl Square-Bore Carb Flange.
edelbrock 1405 600cfm carb

My questions : Can I use this kind of spacer ? I have a phenolic one ?

how does the upper and lower seals look like ? Thx !

 

[janschutz]

that looks tall. With the extra height of the 351W, you do not have much clearance for the air cleaner. I only have about 3/8" of clearance left on mine setup.

 

[B67FSTB]

Thats an example. Its a 1/2 spacer with the 4 holes.
And the engine is on a teststand but it should work in a 67 engine bay.
Just wondering which gaskets to use beneath and above the spacer.

 

[tarafied1]

I just use regular stock type gaskets on my spacer