camber gauge(rough setting only)

[Dne']

I made a very crude "camber gauge", but I think at least the tire doesn't look so tilted out, I set it where the bubble was just a little on the positive side from zero! You can see the bubble before I set the camber.(plus, not shown in the photo:: I had the front wheels on my hydraulic wheel dollies to the wheel would move with the adjustment!) I set the Toe with a tape measure(1/8th" toe), at least until I can get a professional alignment. As said, a rough measurment!
dne'

 

[AzPete]

I think you used the wrong color bungee cord to give you the proper setting.....lol.

Very good for a place to start from. For sure, it is not rocket science is it.