• Hello there guest and Welcome to The #1 Classic Mustang forum!
    To gain full access you must Register. Registration is free and it takes only a few moments to complete.
    Already a member? Login here then!

Anybody familiar with a '66 Galaxie.

L

lethal289

Active Member
Specifically if a 9" rear out of it fits in a 67 stang. I cant find any info online, and the owner is like talking to a wall. I need to find out so i know if its worth it to go see. Its still in the car and is being parted out. TIA!
 
thanks pete but thats what i've been finding. That lists only 69 and later. This ones a 66. I wonder if it wasnt available in 66. But the guy says its stock with it, been in the family since new. :conf
 
"lethal289" said:
thanks pete but thats what i've been finding. That lists only 69 and later. This ones a 66. I wonder if it wasnt available in 66. But the guy says its stock with it, been in the family since new. :conf
Click to expand...

Picture in your mind Mike Meyers and mini me for this..........


They sell these things called "tape measures", you use it to "measure" the rear end to see if it will fit.
 
"silverblueBP" said:
Picture in your mind Mike Meyers and mini me for this..........


They sell these things called "tape measures", you use it to "measure" the rear end to see if it will fit.
Click to expand...
Hey d-bag, the owner wont measure, and its like 1.5 hours away. so im gonna pass. So you can take you tape measure, wrap it around some custom lumber, and shove it right up your :burn :stfu. Dont forget your :ky
 
"lethal289" said:
Hey d-bag, the owner wont measure, and its like 1.5 hours away. so im gonna pass. So you can take you tape measure, wrap it around some custom lumber, and shove it right up your :burn :stfu. Dont forget your :ky
Click to expand...


You're killin me Clark :rofl

Sorry, I'm feeling a little smart alecky today, kinda like most other days but different.
 
Mark,
I am betting Jake cant read a tape and merely gets by with..."its two small lines over from that one big line"... :danc
 
"lethal289" said:
Specifically if a 9" rear out of it fits in a 67 stang. I cant find any info online, and the owner is like talking to a wall. I need to find out so i know if its worth it to go see. Its still in the car and is being parted out. TIA!
Click to expand...

I have a friend that has a 65 Galaxie with a 66 frame under it. He used the 66 rear end and it is about 3" wider than a 69 Mustang. He tried to put 69 Mustang axles in it. Since a 69 Mustang takes the same axles as your 67 it will be to long for you.
 
"napaguy" said:
Mark,
I am betting Jake cant read a tape and merely gets by with..."its two small lines over from that one big line"... :danc
Click to expand...

:rofl :rofl good one Pat
 
"95GT" said:
I have a friend that has a 65 Galaxie with a 66 frame under it. He used the 66 rear end and it is about 3" wider than a 69 Mustang. He tried to put 69 Mustang axles in it. Since a 69 Mustang takes the same axles as your 67 it will be to long for you.
Click to expand...
Well that conflicting with what Pete found, but nun the less thanks because it looks like it wont work... Bummer.
"napaguy" said:
Mark,
I am betting Jake cant read a tape and merely gets by with..."its two small lines over from that one big line"... :danc
Click to expand...

No joke, i had a helper what was a high school graduate, no matter how many times i tried to explain quarters, eighths and sixteenths to him, he couldn't get it. What a dumbass, he new how many quarters in a dollar but not in a inch. I had to do just that pat, tell him how man lines to the left or right of the middle big line. Needless to say, he didnt last long with me. Very sad the state of our public school systems.
 
You must log in or register to reply here.
Back
Top