• Hello there guest and Welcome to The #1 Classic Mustang forum!
    To gain full access you must Register. Registration is free and it takes only a few moments to complete.
    Already a member? Login here then!

70_Fastback: RAT ROD - 193x Ford / 1942 GMC Truck

I like the 4'-6" better, but before you decide, you should set the front out there so you get a complete proportional vision. As others have said, it needs a little more behind the wheels.
 
I like the smaller bed but the wheel needs to be a bit forward from where it is and a larger tire..
 
"silverblueBP" said:
I like the 4'-6" better, but before you decide, you should set the front out there so you get a complete proportional vision. As others have said, it needs a little more behind the wheels.
Click to expand...

+1
 
"stangg" said:
+1
Click to expand...

+2

4' 6" box, but move the rear wheels a tad forward.

I also agree that it would be good to mock up the front end so you can see the total length *before* you start cutting the bed.

Nice to see you making good progress.
 
I like the short short box (3'6") if the wheel is centered but I will ride in it no matter what you come up with (hint hint).
 
"silverblueBP" said:
I like the 4'-6" better, but before you decide, you should set the front out there so you get a complete proportional vision. As others have said, it needs a little more behind the wheels.
Click to expand...

+1
 
I like it, but the bed needs to be 6" longer for a 5' bed. The 6" should be in the back. You will need to do something to add weight to the rear in order to get traction!

Mel
 
You must log in or register to reply here.
Back
Top