67 3 groove pulleys for 289 w/ AC & PS

[1965GTFB]

Need part numbers for 3 groove pulleys for a 67 mustang with factory AC, and PS. Only twist is car is a 67 but we are using a 65 289 block if that make a difference. PS is TCP but I don't think that will make a difference either. I have a 3 groove crank and 3 water pump but they interfere with each other.
So need is for:
-Pulley part numbers.
-Source for pulleys since one or both of mine may be incorrect.

Thanks

 

[Jonk67]

I picked up a 3 groove AC Crank pulley for my '67 a few years ago from a member on one of the forums. I can't answer if it will be the same for '65-'67 though. I think this one had the C5AE markings. If it helps any it is 3 3/4" tall, 7 1/8" across the AC pulley.
I found the chart I was looking for, looks like all 3 pulley AC crank should be the same size, part #'s:
C5AE-B; C5AE-6312-B; C5AZ-6312-D
CHART: http://www.mustangtek.com/pulley/Pulley.html
As far as source, if you can't find an original, NPD and others may have repop or Glaziers Mustang Barn
Jon

 

[guruatbol]

I'll look around. I think I might have an extra around here somewhere.

Mel

Sent from my DROID RAZR HD using Tapatalk 2

 

[1965GTFB]

I picked up a 3 groove AC Crank pulley for my '67 a few years ago from a member on one of the forums. I can't answer if it will be the same for '65-'67 though. I think this one had the C5AE markings. If it helps any it is 3 3/4" tall, 7 1/8" across the AC pulley.
I found the chart I was looking for, looks like all 3 pulley AC crank should be the same size, part #'s:
C5AE-B; C5AE-6312-B; C5AZ-6312-D
CHART: http://www.mustangtek.com/pulley/Pulley.html
As far as source, if you can't find an original, NPD and others may have repop or Glaziers Mustang Barn
Jon

Thanks for the pics and measurements. I think I found the crank pulley, will compare measurements to yours.
Still need to find a water pump pulley. It would be a 2 Groove water pump C5AE 8509 A

 

[Jonk67]

Sorry, I got lost in the description and didn't see it was the WP pulley for an AC car you were trying to locate. I think my WP pulley is only a 2 groove? I'll have to look at it now that you point out it may be different for AC.
Jon

 

[Dyno68FB]

I have a box of extra pulleys. I have a 3 crank and 2 wp that should work. Why would u need a 3 wp? I am running alt, wp, compressor and ps off a 2 n 2

 

[1965GTFB]

I have a box of extra pulleys. I have a 3 crank and 2 wp that should work. Why would u need a 3 wp? I am running alt, wp, compressor and ps off a 2 n 2

Let me know if you have a 2 Groove water pump C5AE 8509 A pulley. You can email me at nelsons565@yahoo.com