kb3
Well-Known Member
Also know as "Let's spend Ken's money"
From a previous thread, I have shifted from building a stroked 351 to a stroked 302 for my Early Bronco. My initial plan was to build it with the Ford fuel injection system, but that brings with it some issues due to crank balancers, etc. Still may be the path, but need to hear what others think. The motor has been pulled from the donor Explorer and headed to the machine shop next week to hot tank and inspect. This will be more built for torque than Hp. I want a nice daily driver that still has a bit of get up and go.
I have several questions I need to address.
1. If not the Ford fuel injection system, what system is the best to go with now?
a) Fitech? Have they gotten any better?
b) Edelbrock Pro Flo 4? Currently out of stock, but I have time just need to get the plan in place
c) Other options?
2. suggestions for where to look for 347 stroker kit, heads and cam?
a) previous thread shows Scat to be the better choice
b) best pump gas compression ratio?
c) best place to source the kit, based on past experience?
From a previous thread, I have shifted from building a stroked 351 to a stroked 302 for my Early Bronco. My initial plan was to build it with the Ford fuel injection system, but that brings with it some issues due to crank balancers, etc. Still may be the path, but need to hear what others think. The motor has been pulled from the donor Explorer and headed to the machine shop next week to hot tank and inspect. This will be more built for torque than Hp. I want a nice daily driver that still has a bit of get up and go.
I have several questions I need to address.
1. If not the Ford fuel injection system, what system is the best to go with now?
a) Fitech? Have they gotten any better?
b) Edelbrock Pro Flo 4? Currently out of stock, but I have time just need to get the plan in place
c) Other options?
2. suggestions for where to look for 347 stroker kit, heads and cam?
a) previous thread shows Scat to be the better choice
b) best pump gas compression ratio?
c) best place to source the kit, based on past experience?