1967 4 leaf standard spring and coils

[mmw68]

Hey Guys,

I have a set of standard rear 4 leaf springs, I bought locally to get the car rolling. (only showing one in the picture)
Maybe have a 100 miles on them.
I also have a set of new ball joints, and front standard spring that have been cut 1 inch.

Iam going to Ask $250 shipped, but open to offers and questions!

Thanks - Mark

 

[mmw68]

The springs are marked Eagle 42-437.

 

[Fst Blk]

Lower or upper ball joints? They look like lowers, but I'm not too smart lol. Also, what is the spring rate on the coils before you cut an inch on them? Willing to separate or you want to sell all together?

Bill

 

[stangg]

If mmw68 can accurately measure the spring diameter (excluding powder coat), spring diameter, and # of active coils, you can calculate the spring rate. http://www.stockcarproducts.com/pstech10.htm

 

[Fst Blk]

If mmw68 can accurately measure the spring diameter (excluding powder coat), spring diameter, and # of active coils, you can calculate the spring rate. http://www.stockcarproducts.com/pstech10.htm

Thanks. I'm not sure what I'm looking for yet as far as spring rate. I need to get with John and let him tell me what I need lol.

Bill

 

[mmw68]

Here is more info on the springs:

John's Mustang:
Part Number 66705

1967-1973 Mustang Contour Coil Springs
An excellent street and autocross coil. 600lb/in rate and lowers the front end 1". Prevents bottoming and improves handling. Heavy powder coating for corrosion resistance.
Shipping Weight:10.50 lbs

 

[mmw68]

Iam sure someone can use these parts... make me a offer! I need the garage room!

 

[mmw68]

TTT -