The brake and clutch rubber pedal covers will need to be removed. It's a simple thing to do. The rubber pads have a lip that wraps around the backside of the metal pedal. You just need to "peel" the rubber pad off of the pedal. They'll come off/go on very easily.
The TCP pedal covers mount directly to the flat metal surface of the brake/clutch pedal.
The TCP gas pedal cover mounts right on top of the existing gas pedal. You won't have to remove the gas pedal if you don't want to. You can install the pedal cover with gas pedal in place.
Here are a couple pictures I took for a different purpose, but you can see the pedal covers installed. These covers are the Shelby Signature Series covers that are no longer available, but I believe them to be an exact match of the TCP covers.
If you look carefully, you can see the flat metal portion of the brake/clutch pedal through the holes in the covers. You can also see the screws holding the covers onto the pedals.
Looking at the gas pedal cover, you can see the factory gas pedal through the holes of the pedal cover.
I like the pedal covers. Even though they're not soft rubber, your foot still sticks to the pedal and there are no issues with using them.
