stangman69
New Member
I've got:
Motor - rebuilt 5.0L with B cam and E7 iron heads and low miles. Listed for $750.
TFS Track Heat upper and lower intake. Fresh from powdercoat shop this week. Looks awesome. Listed for $350.
98 Explorer intake. Poor man's GT40. Listed for $125.
87-93 Foxbody Mustang wiring harnesses - PCM main harness, O2 sensor harness and engine controls/injector harness. Couple cut wires on main harness - fuel pump and gauges. Other harnesses are like new. Listed for $400 for all three.
BBK external fuel pump. Crusty looking outside but works fine. I was going to clean and prime and paint it with bedliner coating myself. Listed for $100.
75mm Accufab throttle body. Listed for $150.
90mm Granatelli MAF for 19# injectors. Listed for $100.
87-93 Foxbody Mustang fuel rail assembly with regulator. Listed for $10.
2" 75mm EGR spacer with EGR valve. Listed for $25.
87-93 Foxbody Mustang (maybe other vehicles too) coolant transfer pipes. Practically new condition. Listed for $25.
87-95 Bronco (look very similar to Foxbody headers...Project out from block wider than the vintage Mustang Headman shorties I've got in hand.) 5.0L PaceSetter shorty headers w/O2 sensor bungs. Listed for $150.
All is listed various places individually but if someone was interested in swapping in an EFI 5.0L into something, you've got 98% of what you need right here.
Could do a package deal on some stuff. Let me know. All prices obo. Don't hesitate to make me an offer. I'm moving shortly and need this stuff out of the garage.
Trades considered. Looking for: Systemax II intake, TFS 11R190 heads, 1.6 roller rockers (Crane, Scorpion, etc.), full length headers for 67-70 Mustang with Tremec (1 5/8 or 1 3/4 primaries), Modern Driveline hydraulic clutch kit, etc. Guns, ammo, gun stuff too. I could throw some cash in if need be.
I'm in the Raleigh area and get to Wilson area for work and to Boone area for inlaw visits. Could meet along the way somewhere.
Pictures available.
Nate
Motor - rebuilt 5.0L with B cam and E7 iron heads and low miles. Listed for $750.
TFS Track Heat upper and lower intake. Fresh from powdercoat shop this week. Looks awesome. Listed for $350.
98 Explorer intake. Poor man's GT40. Listed for $125.
87-93 Foxbody Mustang wiring harnesses - PCM main harness, O2 sensor harness and engine controls/injector harness. Couple cut wires on main harness - fuel pump and gauges. Other harnesses are like new. Listed for $400 for all three.
BBK external fuel pump. Crusty looking outside but works fine. I was going to clean and prime and paint it with bedliner coating myself. Listed for $100.
75mm Accufab throttle body. Listed for $150.
90mm Granatelli MAF for 19# injectors. Listed for $100.
87-93 Foxbody Mustang fuel rail assembly with regulator. Listed for $10.
2" 75mm EGR spacer with EGR valve. Listed for $25.
87-93 Foxbody Mustang (maybe other vehicles too) coolant transfer pipes. Practically new condition. Listed for $25.
87-95 Bronco (look very similar to Foxbody headers...Project out from block wider than the vintage Mustang Headman shorties I've got in hand.) 5.0L PaceSetter shorty headers w/O2 sensor bungs. Listed for $150.
All is listed various places individually but if someone was interested in swapping in an EFI 5.0L into something, you've got 98% of what you need right here.
Could do a package deal on some stuff. Let me know. All prices obo. Don't hesitate to make me an offer. I'm moving shortly and need this stuff out of the garage.
Trades considered. Looking for: Systemax II intake, TFS 11R190 heads, 1.6 roller rockers (Crane, Scorpion, etc.), full length headers for 67-70 Mustang with Tremec (1 5/8 or 1 3/4 primaries), Modern Driveline hydraulic clutch kit, etc. Guns, ammo, gun stuff too. I could throw some cash in if need be.
I'm in the Raleigh area and get to Wilson area for work and to Boone area for inlaw visits. Could meet along the way somewhere.
Pictures available.
Nate
Last edited:
