dodgestang
Active Member
So I FINALLY have a new dizzy to use in the 68.
But now I must be forgetting something easy/stupid.
1. Pull the number 1 plug.
2. Put finger over hole.
3. Crank engine with remote starter
4. When finger is blown away from hole STOP
5. Stab dizzy with rotor pointed where you want it
6. Wire cap so #1 aligned with where you pointed rotor (firing order: 1-5-4-2-6-3-7-8)
No fire.
I have confirmed fuel
I have confirmed spark
I have been wiggling dizzy around in about a 20 degree arc and get nothing
Did I mess up with the when finger is blown away from hole step?
But now I must be forgetting something easy/stupid.
1. Pull the number 1 plug.
2. Put finger over hole.
3. Crank engine with remote starter
4. When finger is blown away from hole STOP
5. Stab dizzy with rotor pointed where you want it
6. Wire cap so #1 aligned with where you pointed rotor (firing order: 1-5-4-2-6-3-7-8)
No fire.
I have confirmed fuel
I have confirmed spark
I have been wiggling dizzy around in about a 20 degree arc and get nothing
Did I mess up with the when finger is blown away from hole step?