janschutz
Corn Hauler
Did y'all buy a kit or just buy the parts?
I plan on doing this this coming weekend and need to source and buy the parts.
I plan on doing this this coming weekend and need to source and buy the parts.
-
Hello there guest and Welcome to The #1 Classic Mustang forum!
To gain full access you must Register. Registration is free and it takes only a few moments to complete.
Already a member? Login here then!
Where did you get your battery relo kit?
- Thread starter janschutz
- Start date
tarafied1
Well-Known Member
Re: Where did you get you battery relo kit?
I bought one from Summit years ago for my 67
I bought one from Summit years ago for my 67
A
Anonymous
Guest
I make my own since I have a stock of quality marine grade wire. When I run out, dunno.
Jonk67
Well-Known Member
I pieced mine together but mounted the battery (steel tray & Optima) under the package tray and ordered 1/0 welding cable. Awaiting relay and verifying the ign. wires.
Jon
Jon
apollard
Active Member
Bought individual parts. Used a high quality set of 20 ft / 2 ga jumper cables as the main lead - $40 vs nearly 100 for 0 ga welding at the time. Bonus is that left me with the negative lead from the jumpers, which I used to make cables for the boat.
Lots of folks will say 2 ga is too light, but I see less than a volt or so drop - and that is cranking with the old boat anchor starter, not a PMGR starter.
Lots of folks will say 2 ga is too light, but I see less than a volt or so drop - and that is cranking with the old boat anchor starter, not a PMGR starter.
Jonk67
Well-Known Member
Can't say as I don't golf but I put mine over the rear axle to make room in case I need to haul a body
Jon
Jon
Must be nice to have a coupe for that needed truunk space."Jonk67" said: