Author Topic: JohnPro-Official StangFix Fender Roller Tool Box update (Read 4872 times)

SAC69 · « **Reply #75 on:** September, 13, 2011, 01:52:50 PM »

Quote from: cmayna on September, 13, 2011, 10:39:52 AM

Just tape a pic of his avatar.

Best idea you've ever had, Craig.

janschutz · « **Reply #76 on:** September, 13, 2011, 03:57:35 PM »

Quote from: cmayna on September, 13, 2011, 10:39:52 AM

Just tape a pic of his avatar.

I printed out his avatar but it does not move, am I doing something wrong?

Midlife · « **Reply #77 on:** September, 13, 2011, 04:45:21 PM »

Quote from: janschutz on September, 13, 2011, 03:57:35 PM

I printed out his avatar but it does not move, am I doing something wrong?

You have to roll your eyes, John...

janschutz · « **Reply #78 on:** September, 13, 2011, 04:55:23 PM »

I get it now. Also since Julie saw me looking at it, I see two of them.

ko67 · « **Reply #79 on:** September, 13, 2011, 05:20:03 PM »

hey guys. If Mike Tyler works downtown, where I also work, l could pick up the box from john and meet mike downtown to drop it off....

cmayna · « **Reply #80 on:** September, 13, 2011, 05:23:02 PM »

You guys work it out.

miketyler · « **Reply #81 on:** September, 14, 2011, 02:25:35 AM »

I just PM'd JanSchutz. I hope to get away on a lunch hour and can pickup tomorrow or next day. KO, if you are making the trip anyway and can wok it out with him, would save me some time and gas. Been crazy busy here lately, I work for ATT in the headquarters building downtown.

sgtjunior · « **Reply #82 on:** September, 14, 2011, 08:07:09 AM »

Quote from: janschutz on September, 13, 2011, 03:57:35 PM

I printed out his avatar but it does not move, am I doing something wrong?

It means you married her

miketyler · « **Reply #83 on:** September, 17, 2011, 08:15:40 AM »

Met up with Jan yesterday, was great talking to a fellow stangfixxer and got to check out his car. I think we both have a fondness for all things stainless....

Anyhow, will get her done this weekend. In all our talking though yesterday I didnt get the lock combination. Can one of you guys PM me that? Also, let me know who is next in line on this.

cmayna · « **Reply #84 on:** September, 17, 2011, 12:33:31 PM »

Will pm you when I get home

cmayna · « **Reply #85 on:** September, 17, 2011, 12:47:17 PM »

PM sent with combo

miketyler · « **Reply #86 on:** September, 17, 2011, 04:37:32 PM »

Got the Mustang done. Man, that was a workout for an old guy. I did crack my paint all to hell on the drivers side, very little if any on the passenger side. Am not too worried, will be covered with wheelwell molding. I don't believe I will be able to run the G-Force tires. Total tire width mounted on the 11" wide TT II is 12 15/16"

ZFORCE · « **Reply #87 on:** September, 18, 2011, 08:32:19 AM »

Fast work! Your fenders came out nicer than mine! I had to go over the PO's weak attempt at rolling the fenders. Don't forget the John Henry!

Sluggo · « **Reply #88 on:** September, 21, 2011, 12:16:11 PM »

Where's it headed next?

I just dropped mine another inch in the back and about an inch and a half in the front.

I'm ready for it.

cmayna · « **Reply #89 on:** September, 21, 2011, 01:06:05 PM »

So, you're ready to use it?
.
.
text mssg just received back saying "uh yep"
.
.
Mike, I just PM'd you Sluggo's addy. Go ahead and let er rip to Richmond, TX.

Fast68back · « **Reply #90 on:** September, 21, 2011, 05:24:58 PM »

Bout time you lowered that thing!

silverblueBP · « **Reply #91 on:** September, 21, 2011, 05:34:05 PM »

Quote from: Fast68back on September, 21, 2011, 05:24:58 PM

Bout time you lowered that thing!

I thought he was just paying homage to Pete and Jake!

Sluggo · « **Reply #92 on:** September, 21, 2011, 08:26:46 PM »

Quote from: Fast68back on September, 21, 2011, 05:24:58 PM

Bout time you lowered that thing!

Thinking about going another 1/2 inch in the front or 1/4 up in the back. it's nose up just a bit still.

70_Fastback · « **Reply #93 on:** September, 22, 2011, 04:56:24 AM »

Drop da front down more.

cmayna · « **Reply #94 on:** September, 22, 2011, 05:10:35 AM »

Just don't fill the tank all the way.........

silverblueBP · « **Reply #95 on:** September, 22, 2011, 05:45:25 AM »

Drop a Boss 429 in it.

miketyler · « **Reply #96 on:** October, 11, 2011, 12:25:26 PM »

I forgot to weigh this thing. According to info on page 1 its tool+10lbs for box. Roughly 35 lbs?

Sluggo · « **Reply #97 on:** October, 14, 2011, 01:35:13 PM »

32.2 lbs.
Enroute to next victim.

Right side went like clockwork. Left side got some paint cracking but the was about a paper thickness of filler under it. No biggie

Sent from my HTC Liberty using Tapatalk

Sluggo · « **Reply #98 on:** October, 14, 2011, 01:45:33 PM »

Sent from my HTC Liberty using Tapatalk

mmw68 · « **Reply #99 on:** January, 12, 2012, 05:05:53 PM »

Is the Fender rolling tool still in Texas? Ya think it could make a trip austin? I was just looking into renting one off ebay, and it occurred to me the Stangfix.com tool might be a option. I'll even be in the Houston area next week, but not driving the Mustang. ;(

Thanks -Mark

News:

Links

Random Image from the Gallery

Latest Victims

Author Topic: JohnPro-Official StangFix Fender Roller Tool Box update (Read 4872 times)

StangFix Approved Vendors