Author Topic: JohnPro-Official StangFix Fender Roller Tool Box update (Read 4872 times)

cmayna · « **Reply #100 on:** January, 12, 2012, 06:33:25 PM »

Mark,
I believe it is in AL getting ready to go to OH. After that, it might be able to pass through TX only if you are extremely ready to use it for I have 3-4 people on the west coast waiting for it.

Craig

ZFORCE · « **Reply #101 on:** January, 16, 2012, 10:05:48 PM »

Just curious how that old box is doing. Can anyone post pics, also pics of the signatures too. Thx.

mmw68 · « **Reply #102 on:** January, 17, 2012, 06:18:20 AM »

Quote from: cmayna on January, 12, 2012, 06:33:25 PM

Mark,
I believe it is in AL getting ready to go to OH. After that, it might be able to pass through TX only if you are extremely ready to use it for I have 3-4 people on the west coast waiting for it.

Craig

Graig,

Thanks for the update, I could not wait - I tore up a tire last week, due to my suspension issues. Suspension has been taken care of, and the hot-rod shop paid for a new tire. Some kid on Craig's list rents his Eastwood rolling tool with a heat gun, for $50/five days, and was only a few miles from my house. So, a quick roll on the fenders Saturday morning, new tire that afternoon!

midpack · « **Reply #103 on:** January, 17, 2012, 06:21:42 AM »

Quote from: ZFORCE on January, 16, 2012, 10:05:48 PM

Just curious how that old box is doing. Can anyone post pics, also pics of the signatures too. Thx.

I added some foam to try and protect the lock... It was poking out of the cardboard box when I got it

toddwallace · « **Reply #104 on:** January, 17, 2012, 08:49:00 PM »

If it makes it around the Dallas / Fort Worth area, I am in need for my '66 Fastback..

ZFORCE · « **Reply #105 on:** January, 26, 2012, 07:25:35 PM »

Thanks Midpack, so are people still signing the box?

cmayna · « **Reply #106 on:** January, 27, 2012, 06:23:56 AM »

All I know is that it recently arrived in OH. Next stop to be TX (ToddWallace), then to WA and back finally to home CA.

midpack · « **Reply #107 on:** January, 27, 2012, 07:08:12 AM »

Quote from: ZFORCE on January, 26, 2012, 07:25:35 PM

Thanks Midpack, so are people still signing the box?

I added mine, it was either that or I wanted to find one of those travel stickers you used to see on car windows

tt400 · « **Reply #108 on:** January, 31, 2012, 04:25:52 PM »

Hope when it comes to Washington I get a chance to use it.

silverblueBP · « **Reply #109 on:** January, 31, 2012, 06:05:50 PM »

Quote from: tt400 on January, 31, 2012, 04:25:52 PM

Hope when it comes to Washington I get a chance to use it.

You just have to send Craig pics of your junk.

toddwallace · « **Reply #110 on:** January, 31, 2012, 09:12:32 PM »

Quote from: cmayna on January, 27, 2012, 06:23:56 AM

All I know is that it recently arrived in OH. Next stop to be TX (ToddWallace), then to WA and back finally to home CA.

I'm all ready...

dm289 · « **Reply #111 on:** February, 13, 2012, 02:34:38 PM »

Quote from: toddwallace on January, 31, 2012, 09:12:32 PM

I'm all ready...

It is now on its way to Texas...

cmayna · « **Reply #112 on:** February, 15, 2012, 09:42:02 AM »

oh joy. Then off to WA for a couple stop overs and then finally back to CA.

tt400 · « **Reply #113 on:** February, 15, 2012, 12:22:31 PM »

Guess I better get the front suspension done asap if its coming back to Washington.

cmayna · « **Reply #114 on:** February, 15, 2012, 06:21:04 PM »

It was never in WA but it will make it's debut soon which does include your address assuming you ARE ready for it and you PM your address to me.

tt400 · « **Reply #115 on:** February, 16, 2012, 11:11:29 AM »

Most of the frond end will be going back on this weekend except for the upper controll arm that wont be here until monday. I will be ready and I will pm you my address.
Thanks

chillininnh · « **Reply #116 on:** February, 16, 2012, 11:37:20 AM »

Could use it in New Hampshire whenever.

stangg · « **Reply #117 on:** February, 16, 2012, 12:43:33 PM »

I think it already made it's new england sweep, but if not I'd be interested in using it too.

cmayna · « **Reply #118 on:** February, 16, 2012, 12:51:21 PM »

When it finishes satisfying the Cali boys, it can then head back out east bound.

Mr. Din · « **Reply #119 on:** February, 20, 2012, 02:35:55 PM »

If the tool is in Texas( I am in Houston) after March 14th. I would love to use it. Let me know.

toddwallace · « **Reply #120 on:** February, 21, 2012, 04:14:26 PM »

Not sure who is next in line, but I have it in Fort Worth. Was going to use it last weekend, but it was cold and rainy. Hopefully will get to use it this weekend.

dodgestang · « **Reply #121 on:** February, 21, 2012, 04:24:02 PM »

So I happen to own one of these tools......and I am thinking about using it next weekend to help a friend out....however....mine didn't come with instructions. Anyone want to write out some pointers?

Sluggo · « **Reply #122 on:** February, 21, 2012, 05:23:36 PM »

Quote from: dodgestang on February, 21, 2012, 04:24:02 PM

So I happen to own one of these tools......and I am thinking about using it next weekend to help a friend out....however....mine didn't come with instructions. Anyone want to write out some pointers?

It seemed to me that it worked better when you set the tool's wheel at the final angle from the start. The same angle as inside of the outer wheel house. Then take your time and gradually roll it. That also seems to be much easier on the paint on the visible parts of the lip.

I rolled the left side of mine starting at a shallow angle with less than stellar results. I got a couple cracks on the outer part of the lip and even though it was barely visible I decided to repaint the quarter.

I've had replacement stripes on order from the guy that originally cut mine (since Thanksgiving) and I'm about to lose patience with him and blast the shit out of him on every forum I'm part of.

Grabber70Mach · « **Reply #123 on:** February, 21, 2012, 05:33:19 PM »

Quote from: dodgestang on February, 21, 2012, 04:24:02 PM

So I happen to own one of these tools......and I am thinking about using it next weekend to help a friend out....however....mine didn't come with instructions. Anyone want to write out some pointers?

Hope this helps Nick.