fastwayfirebird400
New Member
I will be adding details of my car for sale throughout this week. Gulf Stream Aqua, Black interior.
Car has had all HARD metal work completed and sits on a rotisserie in Southern Polyurethane Red Oxide Primer . It will still need some small dent removal on the original fenders, door and gap work if you want to get it tighter.
Metal work consisted of the following:
Full 1 piece floor
Pass side Floor support
Both Trunk floors
1 outer torque box ( front)
1 Pass side Full Quarter Panel
Pass rear outer wheel house (NOS)
Rear tail light panel (NOS)
Battery Tray
Full Cowl Panel
Original Shaker hood
1 original perfect door
1 Reproduction door
both Headlight doors are perfect
Original Ford Fenders
Reproduction deck Lid
Interior was near perfect and only need the driver seat bottom recovered (used NOS Comfort weave)
Complete Metal dash has been restored in Charcoal Black Poly. The cluster, clock panel, have been restored and are like new.
Auto console has been restored in correct Charcoal Black
All interior trim metal and plastic rear panels have been stripped and shot in the correct Charcoal Black Poly
I have the perfect original door panels restored with new carpet, pull cups.
Ford Tooling dash Pad is ready to install.
The interior is completely done and ready to install less the carpet.
All Factory installed drive train
9 Inch Rear diff has been restored.
C6 original
Original Motor sitting on engine stand.
Shaker setup is complete with Base and shaker top media blasted to bare aluminum. Air Cleaner, Mid Plate and flapper are in primer and ready for Ford Blue ready to spray (PPG Paint Included)
Front suspension is as removed from car (stock)
All Glass is perfect (glue in windows)
New Windshield (included)
Perfect Hood Trim
NOS Front Turn signals
NOS HL Bucket Trim
NOS Lower Grill Trim
Original Grill
NOS Back up lights
NOS Fuel Cap
NOS Hood Hinges
And A full list of more NOS parts and reproduction parts already acquired.
Yes the Buck Tag, Fender apron VIN stamp,Dash VIN and Door VIN Plate are all present.
I will add more about the car and Pics when I can. Price will be $24,000 not including the Rotisserie. Car is located just North Of Atlanta and is in the CJ registry.
Car is as equipped:
C-6 Cruise-o-Matic
3.25 Traction Lock Diff
F70X14 Raised White letter
Power Disk Brakes
AM Radio
Tinted Glass -Complete
Car was sold out of English Motors in Highpoint N.C. I drove this car to confirm all was in working order before tear down.
I also have hundreds of pics of tear down and metal work.
I have the Deluxe Marti Report, Build sheet, Original Title
You can reach me direct at fastway @ mindspring. com
Thanks,
Mike
Car has had all HARD metal work completed and sits on a rotisserie in Southern Polyurethane Red Oxide Primer . It will still need some small dent removal on the original fenders, door and gap work if you want to get it tighter.
Metal work consisted of the following:
Full 1 piece floor
Pass side Floor support
Both Trunk floors
1 outer torque box ( front)
1 Pass side Full Quarter Panel
Pass rear outer wheel house (NOS)
Rear tail light panel (NOS)
Battery Tray
Full Cowl Panel
Original Shaker hood
1 original perfect door
1 Reproduction door
both Headlight doors are perfect
Original Ford Fenders
Reproduction deck Lid
Interior was near perfect and only need the driver seat bottom recovered (used NOS Comfort weave)
Complete Metal dash has been restored in Charcoal Black Poly. The cluster, clock panel, have been restored and are like new.
Auto console has been restored in correct Charcoal Black
All interior trim metal and plastic rear panels have been stripped and shot in the correct Charcoal Black Poly
I have the perfect original door panels restored with new carpet, pull cups.
Ford Tooling dash Pad is ready to install.
The interior is completely done and ready to install less the carpet.
All Factory installed drive train
9 Inch Rear diff has been restored.
C6 original
Original Motor sitting on engine stand.
Shaker setup is complete with Base and shaker top media blasted to bare aluminum. Air Cleaner, Mid Plate and flapper are in primer and ready for Ford Blue ready to spray (PPG Paint Included)
Front suspension is as removed from car (stock)
All Glass is perfect (glue in windows)
New Windshield (included)
Perfect Hood Trim
NOS Front Turn signals
NOS HL Bucket Trim
NOS Lower Grill Trim
Original Grill
NOS Back up lights
NOS Fuel Cap
NOS Hood Hinges
And A full list of more NOS parts and reproduction parts already acquired.
Yes the Buck Tag, Fender apron VIN stamp,Dash VIN and Door VIN Plate are all present.
I will add more about the car and Pics when I can. Price will be $24,000 not including the Rotisserie. Car is located just North Of Atlanta and is in the CJ registry.
Car is as equipped:
C-6 Cruise-o-Matic
3.25 Traction Lock Diff
F70X14 Raised White letter
Power Disk Brakes
AM Radio
Tinted Glass -Complete
Car was sold out of English Motors in Highpoint N.C. I drove this car to confirm all was in working order before tear down.
I also have hundreds of pics of tear down and metal work.
I have the Deluxe Marti Report, Build sheet, Original Title
You can reach me direct at fastway @ mindspring. com
Thanks,
Mike
Attachments
-
mach 1 resto (1).JPG218.6 KB · Views: 34
-
mach 1 resto (3).JPG255.1 KB · Views: 29
-
Mustang 9 inch .JPG1.5 MB · Views: 29
-
mach 1 resto (2).JPG231.1 KB · Views: 28
-
Mach 1.jpg243 KB · Views: 31
-
June 19 2008 015.jpg195.7 KB · Views: 32
-
June 19 2008 014.jpg228.6 KB · Views: 29
-
June 19 2008 006.jpg212.3 KB · Views: 30